SPM leonova emerald - Instrument Settings

A:10 General instrument functions
A
Instrument settings
The seven files in the ‘Settings’ window contain the
general instrument settings. With a new Leonova,
the first task is to check the available functions and
to adjust the instrument.
Press SHIFT+F3 to open the instrument settings
window, or press the MENU key and select ‘Settings’
with the UP/DOWN arrow keys. Open with ENTER.
In the ‘Settings’ window, select file with the UP/
DOWN arrow keys, open with ENTER or F1.
When the appropriate settings are made, press the
MENU key. Select ‘Previous’ or ‘Next’ with F1/F2 to
make additional settings. Press the BACK key to save
the instrument settings and quit settings mode.
These are the files:
• Generalsettings,amenuforseveralfunctions.
Select units: the default is mm, °C, Hz.
dB mode: scale in dB for the y-scale in spectrum.
Icons: show large/small icons.
Layout: measuring point tree layout, preview live
spectrum, show theoretical symptoms.
Automatic save: Prompt to save after measure-
ment.
Balancing: select ounce, counter rotational de-
grees and output unit (ACC, VEL, DISP).
Screen: Adjust brightness.
Power saving: Adjust time for ‘sleep mode’ and
automatic ‘power off’.
• Date/time:Adjustwhenneeded.
• Tansducers:Registeryourtransducer(s).Attention!Allvaluesmustbetakenfromthetrans-
ducer’s calibration card.
• Language:Chooseamongavailablelanguages.
• Fonts:Selecttextpresentation.
• Createdefaultfiles:Createstheinitialfilesneededtousethemeasuringfunctions.
• Functionanduse:Showsavailablefunctions.