General instrument functions A:13
Display setting.
You can change the backlight brightness (1). In-
crease or decrease with LEFT/RIGHT arrow keys.
You can name your instrument (2). The name ap-
pears when communicating with the computer.
If you have not named the instrument the instru-
ment serial number will be displayed.
1
Set date/time
Before measuring with Leonova, update the
internal clock. The measurements time data is of
great importance when transferred to Condmas-
ter.
To make the update, open ‘Date/Time’ (4) under
‘MENU/Settings’. Select the date field and press
ENTER. Select month with F2/F3 and navigate
with the arrow keys to select date (5). Press F1
to save.
To set the time (6), select the time field and
press ENTER. Use LEFT/RIGHT arrow keys to
change field and UP/DOWN to change value.
Press F1 (OK) to save.
5
6
4
Power saving.
You can adjust the time for ‘sleep mode’ (3). The
display will shut down when not used within this
setting. ‘Power off’ (4) will shut down the instru-
ment completely when not used within this time.
Select with UP/DOWN and confirm with ENTER.
To disable the automatic power off, leave it blank
(none). Remember to reset a value in order to turn
off the instrument.
3
4
2
To Next Page
Loading...
