1
This selection (1) affects the measure-
ment window.
‘Measuring point name . .’ repeats the name on a
separate line.
Settings for the ‘Measure All’ function: Show
‘Measure All’ on separate line, show ‘Measure All’
information dialog and open summary view after
‘Measure All’ measurement.
‘Display colours . .’ displays the evaluation icon
for each listed measuring technique.
‘Automatic save . .’ opens a ‘Save yes - no’ win-
dow immediately after a measurement.
‘Counter rotational degrees’ means that angles
are measured opposite to the direction the rotor
is moving.
‘Ounce’ changes weights from grams to ounces.
‘Output unit’, selected from a list (2), is the unit of
the vibration measurement (acceleration, velocity
or displacement).
These selections concern ‘Balancing’.
2
To Next Page
Loading...
