SPM leonova emerald - Page 142

E
E:20 Vibration measurement
‘Peak’ and ‘Peak to peak’ values are displayed
in the selected time signal unit.
Press F2 to see the full scale graphics where
you can re-scale the axis, set comments etc.
(seepartBofthismanual).
Change graph by pressing F3 in the graphics
window.PressingF1(Previous)andF2(Next)
toggles between the different graphs.
The spectrum is displayed in the selected
spectrumunit,herevelocity(1).
PressingF4(2)togglesbetweenHz,CPMand,
if rpm is measured, orders.
You can choose spectrum type, zoom functions,
time signal and other graphical functions with
the function keys. See ‘Spectrum functions’ in
part B of this manual.
1
2