SPX FLOW 030-U3 User Manual

Maintenance Waukesha Cherry-Burrell
®
Brand Universal 3 Pump
Page 62 95-03103 11/2018
20. Install the rotary seal O-ring on each shaft.
21. Figure 127 shows the rotary seal O-ring installed on the
shaft.
22. Install the flush-side rotary seal onto the shaft, aligning the
tab with the notch on the seal.
23. Figure 129 shows the seal installed.
Figure 126 - Install O-ring
Figure 127 - O-ring installed
Figure 128 - Install flush-side rotary
seal
Figure 129 - Rotary seal installed

SPX FLOW 030-U3 Specifications

General

Brand	SPX FLOW
Model	030-U3
Category	Water Pump
Language	English