P340 flexiprobe Operation Manual 20
5.6 System Menu
The P340 controller features an intuitive hierarchical list-based menu system that can be accessed by
pressing MENU when this is visible on the menu bar at the bottom of the screen.
From the main Menu screen (Figure 5.3) you will be able to access 3 main submenus:
Jobs: enter this menu to start, edit or review a job. See Section 9.5 for more details;
Files: enter this menu to enter the file browser and access the data contained in your storage devices. See
Section 7.2 for more details;
Setup: enter this menu to setup your system. See Section 5.7 for more details.
5.6.1 General Navigation and text entry
To navigate any menu, browser screen or form, use the arrow keys on the keypad or keyboard:
Use the ▲ or ▼ keys to select a submenu or to browse screen content.
Use the ► key, OK on the keypad or Enter on the keyboard to enter the selected submenu.
Use the ◄ key to return to the previous menu (or to the live camera picture if pressed when in the
top menu).
Please note that in some menus where the ◄ key is used for scrolling functions, or where a decision is
required you may have to use EXIT, CANCL or OK to exit the current menu. If you are entering Job
information at the start of your first recording (video or photo) you will have to press the ● or buttons
again.
Where a selection is required use the arrow keys to cycle through the options in that menu screen and
press OK or Enter to confirm the selected choice.
NOTE: You can use the keyboard’s Function, Enter and cursor keys to navigate and select options in the
menu.
To Next Page
Loading...