SPX Pearpoint Flexiprobe P340 - 9.5 Job details (Creating a new Job)

P340 flexiprobe Operation Manual 54
To de-activate a Job, press STOP.
9.5 Job details (Creating a new Job)
Details about your inspections are required to be able to organize your work into JOBS and to be able to
produce reports.
There are 3 forms you will have to fill to create a new job:
1. Client (See Section 9.5.)
2. Site (See Section 9.5)
3. Survey (See Section 9.5.)
When in any of the 3 forms:
 Use the arrow, Pg Up and Pg Dn keys to navigate the forms. You can also key in the desired field
number.
 Press OK to edit.
 Press CLEAR to delete the selected field content.
 Press ◄ to return to the Job Reviewer screen.
NOTE: New or edited fields will only be saved when pressing SAVE on the Job Reviewer menu.
Personalizing your Job templates
You can personalize your job’s details by modifying the P340 Job templates.
You can remove or rename fields and add custom ones modifying the forms to suit your needs.
To personalize Job templates you will have to use FlexiSight Manager and create a custom job template.
To update the controller with a custom Job template see Section 5.12.
Default Client form
This form allows you to enter details about the client. You can enter the client’s name, address and
specify a reference if required.
By default the “name” field is “client”.
This information appears on the Report Details page of the HTML report. See Section 9.10