P340 flexiprobe Operation Manual 26
Quality: You can choose between 4 different profiles: High, Medium, Low and Custom.
Frame size: selects the dimensions (in pixels) of the recorded video. The options are:
o Full: PAL (720x576 pixels) or NTSC (720x480 pixels) depending on
your camera.
o VGA: 640x480 pixels.
o QVGA: Quarter VGA, 320x240 pixels.
Bitrate: sets the bitrate (memory usage in megabits, or Mb, per second of recording). Select
between High, Medium and Low.
Encoding: sets the encoding. Select between: Progressive Full, Progressive Half or Interlaced.
NOTE: Selecting interlaced will create better quality video but it will not play on a PC unless a suitable
CODEC is installed. FlexiSight Manager supports only progressive encoding.
Frame Rate: sets the number of frames per second that will be recorded / displayed. Select
between:
o Maximum (30FPS for NTSC and 25FPS for PAL).
o Medium (20FPS).
o Minimum (10FPS).
NOTE: Bitrate is the only parameter that will affect your recording sizes. Higher bitrates will result in better
video quality and larger file sizes.
5.9 Setting up your Reel
From the Setup screen enter the Reel menu to select your correct reel length and type connected.
NOTE: You will have to perform this action every time you use a different reel with your controller. Having
the wrong reel/length selected will affect the accuracy of the distance counter.
Select between:
Plumbers 100ft/30m
Plumbers 200ft/60m
Plumbers MK2 100ft/30m
Plumbers MK2 200ft/60m
P341 120ft/35m
P342 200ft/60m
P342 400ft/120m
P343 500ft/150m
To Next Page
Loading...