P340 flexiprobe Operation Manual 39
USB flash drive compatibility
The P340 controller supports high-speed USB flash drives. This is the minimum requirement for high
quality video recordings.
Using low cost USB flash drives may result in videos of a lower quality or failure to operate.
Pearpoint recommends using only USB flash drives produced by known flash memory manufacturers.
Please contact your local Pearpoint representative for the latest list of recommended USB flash drives. Or
rd_support@spx.com
7.2 File browser
The P340 flexiprobe system features a file manager, see Figure 7.2, that allows you to browse, review
and manage your files and folders contained in your storage devices.
NOTE: Folders are sometimes referred to as directories.
You can also view folders contained in a Compact Flash card when you connect the controller to your
computer via USB connection (see Section 7.5 for information on USB connections) by using Windows
Explorer or the Mac OS X Finder.
The File Browser screen has 4 sections:
Memory status bar: shows the selected
device memory status.
Drive navigation bar: shows the storage
device selected and folder location.
Browser screen: shows folders and files.
Bar menu: shows the functions available.
To navigate the file browser:
1. Enter the Files menu and press the OK or video ► (play) key.
2. The controller will list any folders on the selected memory storage device; Folders are indicated in
the browser screen by [square brackets] for example [JOBS].
3. The current storage device selected, and position in the folder structure, is shown in the drive
navigation bar. The compact flash is represented by A:/, the USB flash drive by B:/.
For example A:/JOBS indicates that your current position is in the Compact Flash card’s JOBS
To Next Page
Loading...