P340 flexiprobe Operation Manual 62
Browsing and printing
1. Connect the memory storage device to your PC. If your memory device is a Compact Flash you can
use the built-in PC USB connection. See Section 7.5 for more details on how to connect your
controller to a PC
2. Once your computer recognizes the controller, use Windows Explorer to locate the survey folder.
3. You can then copy or move the report folder to your computer or view it directly from your memory
storage device.
4. Using Windows Explorer locate the report.html file in the report folder.
5. Open “report.html” with a web browser.
6. If prompted, allow Active Content by right-clicking the yellow warning bar at the top of the screen
and select the ‘Allow Active Content’ option.
The report will load and display the navigation frame on the left and the title page on the right.
To assist navigation, the report is presented in a similar fashion to a web site or a PDF document with
bookmarks, see Figure 9.6.
The report is divided into two frames:
The navigation frame on the left displays a link to each page and a print
link that prints the currently displayed page. Refer to Figure 9.7.
The content frame on the right displays the currently selected report page.
To print a page, select it using the links on the navigation frame and then press
the Print This Page link. You must repeat this step for each page of the report.
NOTE: Use the Print This Page link rather than using the File -> Print command,
otherwise the printed page will also include the navigation frame and be printed
in landscape format.
Figure 9.6: Viewing reports in a web browser
Figure 9.7: Navigation Frame
To Next Page
Loading...