ST STM32F31xx - Page 132

Controller area network (bxCAN)
UM1581
132/584
DocID023800 Rev 1
CAN entering the specific mode Succeed
CAN_receive_FIFO_number_constants
 #define: CAN_FIFO0 ((uint8_t)0x00)
CAN FIFO 0 used to receive
 #define: CAN_FIFO1 ((uint8_t)0x01)
CAN FIFO 1 used to receive
CAN_remote_transmission_request
 #define: CAN_RTR_Data ((uint32_t)0x00000000)
Data frame
 #define: CAN_RTR_Remote ((uint32_t)0x00000002)
Remote frame
 #define: CAN_RTR_DATA CAN_RTR_Data
 #define: CAN_RTR_REMOTE CAN_RTR_Remote
CAN_sleep_constants
 #define: CAN_Sleep_Failed ((uint8_t)0x00)
CAN did not enter the sleep mode
 #define: CAN_Sleep_Ok ((uint8_t)0x01)
CAN entered the sleep mode
 #define: CANSLEEPFAILED CAN_Sleep_Failed
 #define: CANSLEEPOK CAN_Sleep_Ok
CAN_synchronisation_jump_width