ST STM32F31xx

UM1581
Analog-to-digital converter (ADC)
DocID023800 Rev 1
73/584
2
 ADC_ExternalTrigger_Event3 : External trigger event
3
 ADC_ExternalTrigger_Event4 : External trigger event
4
 ADC_ExternalTrigger_Event5 : External trigger event
5
 ADC_ExternalTrigger_Event6 : External trigger event
6
 ADC_ExternalTrigger_Event7 : External trigger event
7
 ADC_ExternalTrigger_Event8 : External trigger event
8
 ADC_ExternalTrigger_Event9 : External trigger event
9
 ADC_ExternalTrigger_Event10 : External trigger event
10
 ADC_ExternalTrigger_Event11 : External trigger event
11
 ADC_ExternalTrigger_Event12 : External trigger event
12
 ADC_ExternalTrigger_Event13 : External trigger event
13
 ADC_ExternalTrigger_Event14 : External trigger event
14
 ADC_ExternalTrigger_Event15 : External trigger event
15
 ADC_ExternalTrigEventEdge : ADC external Trigger
Polarity. This parameter can be one of the following values:
 ADC_ExternalTrigEventEdge_OFF : Hardware trigger
detection disabled (conversions can be launched by
software)
 ADC_ExternalTrigEventEdge_RisingEdge : Hardware
trigger detection on the rising edge
 ADC_ExternalTrigEventEdge_FallingEdge :
Hardware trigger detection on the falling edge
 ADC_ExternalTrigEventEdge_BothEdge : Hardware
trigger detection on both the rising and falling edges
Return values
 None.
Notes
 None.
3.2.12.4 ADC_StartConversion
Function Name
void ADC_StartConversion ( ADC_TypeDef * ADCx)
Function Description
Enables or disables the selected ADC start conversion .