Stihl MS 200 Service Manual

10 MS 200, MS 200 T
4.3 Chain Lubrication
In the event of trouble with the
chain lubrication system, check
and rectify other sources of faults
before disassembling the oil pump.
.
Condition Cause Remedy
Chain receives no oil Oil tank empty Fill up with oil and check setting of
oil pump if necessary
Oil inlet hole in guide bar is blocked Clean oil inlet hole
Intake hose or pickup body clogged
or intake hose ruptured
Fit new intake hose and pickup
body
Connector blocked Clean connector or replace if
necessary
Valve in oil tank blocked Clean valve or replace if necessary
Teeth on worm worn Install new worm
Oil pump damaged or worn Install new oil pump
Machine losing chain oil Oil pump body damaged Install new oil pump
Oil pump damaged or worn Install new oil pump
Oil intake hose damaged Install new oil intake hose
Oil pump delivers insufficient oil Oil pump worn Install new oil pump
Oil pump delivery rate set too low Adjust oil pump

Stihl MS 200 Specifications

General

Guide Bar Length	30-40 cm
Chain Oil Capacity	0.22 L
Chain pitch	3/8"
Engine Power	2.0 kW
Displacement	35.2 cc
Weight (without cutting equipment)	4.2 kg