EasyManuals Logo

Stihl MS 200 Service Manual

Stihl MS 200
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
17MS 200, MS 200 T
4.7 Engine
Always check and, if necessary,
repair the following parts before
looking for faults on the engine:
- Air filter
- Fuel system
- Carburetor
- Ignition system
Condition Cause Remedy
Engine does not start easily, stalls
at idle speed, but operates normally
at full throttle
Oil seals in crankcase damaged Replace the oil seals
Crankcase leaking or damaged
(cracks)
Seal or replace the crankcase
Engine does not deliver full power
or runs erratically
Piston rings worn or broken Fit new piston rings
Muffler / spark arresting screen
carbonized
Clean the muffler (inlet and
exhaust), replace spark arresting
screen, replace muffler if necessary
Air filter dirty Replace air filter
Fuel hose severely kinked or
damaged
Fit new hose or position it free from
kinks
Engine overheating Insufficient cylinder cooling. Air
inlets in fan housing blocked or
cooling fins on cylinder very dirty
Thoroughly clean all cooling air
openings and the cylinder fins

Table of Contents

Other manuals for Stihl MS 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl MS 200 and is the answer not in the manual?

Stihl MS 200 Specifications

General IconGeneral
Guide Bar Length30-40 cm
Chain Oil Capacity0.22 L
Chain pitch3/8"
Engine Power2.0 kW
Displacement35.2 cc
Weight (without cutting equipment)4.2 kg

Related product manuals