Stihl MS 200 Service Manual

5MS 200, MS 200 T
3. Specifications
3.1 Engine
MS 200 MS 200 T
Displacement: 35.2 cm
3
35.2 cm
3
Bore: 40 mm 40 mm
Stroke: 28 mm 28 mm
Engine power to ISO 7293: 1.7 kW (2.3 bhp)
at 10,000 rpm
1.7 kW (2.3 bhp)
at 10,000 rpm
Maximum permissible engine speed
(with bar and chain): 14,000 rpm 14,000 rpm
Idle speed: 2,800 rpm 2,800 rpm
Clutch: Centrifugal clutch without
linings
Centrifugal clutch without
linings
Clutch engages at: 3,700 rpm 3,700 rpm
Crankcase leakage test
at gauge pressure: 0.5 bar
under vacuum: 0.5 bar
3.2 Fuel System
Carburetor leakage test at
gauge pressure:
0.8 bar
Operation of tank vent at
gauge pressure:
0.5 bar
Fuel: as specified in instruction
manual
3.3 Ignition System
Air gap between ignition
module and fanwheel: 0.25 mm
Spark plug (suppressed): Bosch WSR6F
Electrode gap: 0.5 mm
3.4 Chain Lubrication
Speed-controlled oil pump with reciprocating piston and
manual flow control
Oil pump with adjustable
delivery rate:
3.5 - 9.5 cm
3
/min at
10,000 rpm

Stihl MS 200 Specifications

General

Guide Bar Length	30-40 cm
Chain Oil Capacity	0.22 L
Chain pitch	3/8"
Engine Power	2.0 kW
Displacement	35.2 cc
Weight (without cutting equipment)	4.2 kg