114 MS 200, MS 200 T
15. Special Servicing Tools
No. Part Name Part No. Application Rem.
1 Assembly stand 5910 890 3101 Holding saw for repairs (includes
mount 5910 850 1650)
2 Mount for assembly stand 5910 850 1650 Clamping saw to assembly stand (only
for assembly stand
5910 890 3100)
3 Pump 0000 850 1300 Testing engine and carburetor for leaks
4 Sealing plate 0000 855 8106 Sealing the exhaust port
5 Test flange 1128 850 4200 Leakage test
6 Flange 1123 855 4200 Leakage test
- Sleeve 1124 893 7100 Securing the flange/leakage test
- Hose for leakage test 1110 141 8600 Testing carburetor for leaks
- Plug for leakage test 5910 007 2200 Leakage testing decompression valve
- Nipple 0000 855 9200 Testing carburetor for leaks
7 Screwdriver 5910 890 2305 Adjusting carburetor
- Setting disk 5910 893 6600 Add-on for screwdriver (adjusting
carburetor)
8 Locking strip 0000 893 5903 Blocking the crankshaft
9 Socket DIN 3124-S 19 x12.5L 5910 893 5613 Spark plug
10 Hook 5910 890 2800 Detaching springs on clutch shoes
11 Socket DIN 3124, 13 mm 5910 893 5608 Removing flywheel nut
12 Puller 1116 893 0800 Releasing flywheel 1
13 Setting gauge 1111 890 6400 Adjusting air gap between the ignition
module and flywheel
14 Ignition system tester, ZAT 4 5910 850 4503 Testing ignition system
15 Ignition system tester, ZAT 3 5910 850 4520 Testing ignition system
16 Puller 5910 890 4400 Removing oil seals 1
- Jaws 0000 890 3700 Removing oil seals 1
17 Press sleeve 1129 893 2400 Installing oil seals
18 Installing sleeve 1129 893 4600 Protects oil seal at ignition side
19 Assembly drift 1114 893 4700 Removing and installing piston pin
20 Installing tool 9 5910 890 2209 Installing hookless snap rings in piston
21 Clamping strap 0000 893 2600 Compressing the piston rings
22 Wooden assembly block 1108 893 4800 Supporting the piston
To Next Page
Loading...
