115MS 200, MS 200 T
No. Part Name Part No. Application Rem.
23 Service tool AS (set) 5910 007 2205 Separating the crankcase halves
- Service tool 5910 890 2205
24 Assembly tube 1117 890 0900 Attaching springs
25 Stud puller M8 5910 893 0501 Removing bar mounting studs
26 Installing tool 1116 893 4800 Refitting rewind spring
27 Installing tool 0000 890 2201 Installing rope guide bushing
28 Hook 5910 893 8800 Removing pickup body
29 Screwdriver, T 20 x 100 5910 890 2301 Spline socket screws, installing and
removing (4 mm)
30 Screwdriver, T 27 x 150 5910 890 2302 Spline socket screws, installing and
removing (5 mm)
31 Screwdriver, Q-SW 8 x 200 5910 890 2420 Nuts on carburetor
32 Torque wrench 5910 890 0302 0.5 to 18 Nm
33 Torque wrench 5910 890 0312 6 to 80 Nm
34 Screwdriver bit, T 27 x 125 0812 542 2104 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench (5 mm)
35 Screwdriver bit, T 20 x 125 0812 542 2041 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench (4 mm)
36 Screwdriver bit, T 27 x 150 5910 890 2400 IS-P screws (5 mm)
Remarks
1) Use for releasing only.
To Next Page
Loading...
