61MS 200, MS 200 T
Machine runs trouble-free,
no further action necessary
no
Install new
ignition module,
b 9.2.1
yes
no
– Look for fault in fuel system or
carburetor
– Check engine for leaks
– Check position of flywheel on
crankshaft,
b 8.2, b 9.4
yes
Check operation
of switch shaft:
– Short circuit wire chafed?
– Function between contact spring and switch
shaft contact:
– Position "F" = no connection
– Position "
0" = connection
– If necessary, install new short circuit wire or
wiring harness, b 9.5.1, b 9.5.2
2
3
Powerful
spark?
Engine
runs