Stihl MS 200 - Page 74

73MS 200, MS 200 T
MS 200 T
: Take out the screw (arrow).
– Remove the handle molding and
switch shaft, b 12.1.2
: Take out the screw (arrow).
– Pulll the handlebar (1) out of the
handle housing. Check and
replace if necessary.
161RA167 TG162RA048 TG
1
: Push the handlebar (1) into its
seat (arrow).
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 3.5
162RA008 TG
1