Stihl MS 200 Service Manual

89MS 200, MS 200 T
Check correct installed position.
: Insert the valve (1) in the housing
bore (arrow).
: Use a 6 mm drift to carefully
drive in the new valve (1) from
outside – note installed depth.
: Installed depth of new valve:
a = about 2 - 3 mm
– Reassemble all other parts in the
reverse sequence.
161RA296 TG
1
161RA297 TG
1
a
161RA298 TG

Stihl MS 200 Specifications

General

Guide Bar Length	30-40 cm
Chain Oil Capacity	0.22 L
Chain pitch	3/8"
Engine Power	2.0 kW
Displacement	35.2 cc
Weight (without cutting equipment)	4.2 kg