5 | Technical data STOBER
18
03/2020 | ID 442793.03
5 Technical data
This chapter contains the technical data for the SC6 drive controller, the DC link connection, the safety technology and the
brakes. Additional technical data on the drive controller and accessories can be found in the SC6 drive controller manual;
see the chapter Detailed information [}91].
5.1 Drive controllers
The following chapters contain specifications for the electrical data, dimensions and weight of the drive controller.
5.1.1 General technical data
The following information applies to all device types.
Device features
Protection class of the device IP20
Protection class of the installation space At least IP54
Protection class Protection class I in accordance with DIN EN 61140
Radio interference suppression Integrated line filter in accordance with DIN EN 61800-3, interference emission
class C3
Overvoltage category III in accordance with DIN EN 61800-5-1
Test symbols
Tab. 4: Device features
Transport and storage conditions
Storage/
transport temperature
−20°C to +70°C
Maximum change: 20K/h
Relative humidity Maximum relative humidity 85%, non-condensing
Vibration (transport) in accordance with
DIN EN60068-2-6
5Hz ≤ f ≤ 9Hz: 3.5mm
9Hz ≤ f ≤ 200Hz: 10m/s²
200Hz ≤ f ≤ 500Hz: 15m/s²
Fall height for freefall
1
Weight < 100kg
in accordance with DIN EN61800-2
(or DIN EN 60721-3-2:1997, class2M1)
0.25m
Tab. 5: Transport and storage conditions
Operating conditions
Surrounding temperature during
operation
0°C to 45°C with nominal data
45°C to 55°C with derating −2.5%/K
Relative humidity Maximum relative humidity 85%, non-condensing
Installation altitude
0m to 1000m above sea level without restrictions
1000m to 2000m above sea level with −1.5%/100m derating
Pollution degree Pollution degree 2 in accordance with EN 50178
Ventilation Installed fan
Vibration (operation) in accordance with
DIN EN 60068-2-6
5Hz ≤ f ≤ 9Hz: 0.35mm
9Hz ≤ f ≤ 200Hz: 1m/s²
Tab. 6: Operating conditions
1
Only valid for components in original packaging