Stober SC6A062 Commissioning Instructions

STOBER 11 | Appendix
03/2020 | ID 442793.03
91
11.4 Detailed information
The documentation listed in the following table offers additional relevant information.
Current document versions can be found at http://www.stoeber.de/en/downloads/.
Device/Software Documentation Contents ID
SC6 drive controller Manual System design, technical data, project configuration,
storage, installation, connection, commissioning,
operation, service, diagnostics
442790
MC6 motion controller Manual Technical data, installation, commissioning,
diagnostics
442461
Connection method Manual Selection of encoder, power and hybrid cables,
accessories, technical data, connection
443102
CiA 402 application – SC6, SI6 Manual Project planning, configuration, parameterization,
function test, detailed information
443080
Drive Based (DB) application Manual Project planning, configuration, parameterization,
function test, detailed information
442706
SR6 safety technology – STO via
terminals
Manual Technical data, installation, commissioning,
diagnostics
442741
SY6 safety technology – STO and
SS1 via FSoE
Manual Technical data, installation, commissioning,
diagnostics
442744
EtherCAT communication – SC6,
SI6
Manual Installation, electrical installation, data transfer,
commissioning, detailed information
443025
PROFINET communication – SC6,
SI6
Manual Installation, electrical installation, data transfer,
commissioning, detailed information
443039
Additional information and sources that form the basis of this documentation or are referenced by the documentation:
EtherCAT Technology Group (ETG), 2012. ETG.1300 : EtherCAT Indicator and Labeling. ETG.1300 S (R) V1.1.0. Specification.
2012-01-27.

Stober SC6A062 Specifications

General

Brand	Stober
Model	SC6A062
Category	Controller
Language	English