Stober SC6A062 Commissioning Instructions

STOBER 2 | User information
03/2020 | ID 442793.03
7
2 User information
This documentation covers the SC6 drive controller. You will receive support for the assembly of the individual modules
along with the associated components that you will need to operate the drive controllers in the control cabinet.
You will also find information on wiring the modules correctly and checking their functionality in the group with an initial
test.
2.1 Scope of documentation
This documentation contains important safety instructions as well as a selection of information about the SC6 drive
controller that you need for commissioning.
Note that this documentation does not replace the detailed manual. Read the detailed documentation first before working
with the devices.
You can find the manual and other documentation in PDF format on the enclosed CD/DVD or on our website.
An overview of the available documentation about the SC6 drive controller can be found in the chapter Detailed
information [}91].
2.2 Storage and transfer
As this documentation contains important information for handling the product safely and efficiently, it must be stored in
the immediate vicinity of the product until product disposal and be accessible to qualified personnel at all times.
Also pass on this documentation if the product is transferred or sold to a third party.
2.3 Described product
This documentation is binding for:
SC6 series drive controller in conjunction with the
DriveControlSuite software (DS6) in V 6.4-E or higher and associated firmware in V 6.4-E or higher.
Type ID No.
Drive controller SC6A062 56690
SC6A162 56691
SC6A261 56692
Tab. 1: Described product types, SC6 drive controllers

Stober SC6A062 Specifications

General

Brand	Stober
Model	SC6A062
Category	Controller
Language	English