2 | User information STOBER
8
03/2020 | ID 442793.03
2.4 UL file number
cULus-certified devices with corresponding test symbols meet the requirements of the standards UL 61800-5-1 and CSA
C22.2 No. 274.
Under the file number specified in the following table, you can find the product in the online database of Underwriter
Laboratories (UL):
https://iq2.ulprospector.com
Type File number UL Category Control Number Certification
America Canada cULus/cURus
Drive controller SC6A062 E189114 NMMS NMMS7 cULus
SC6A162
SC6A261
Braking resistors FZMU, FZZMU E212934 NMTR2 NMTR8 cURus
GVADU, GBADU
Output chokes TEP3720-0ES41 E333628 NMMS2 NMMS8 cURus
TEP3820-0CS41
TEP4020-0RS41
Motors EZ or LM series
synchronous servo
motors
E488992 PRHZ2 PRHZ8 cURus
Asynchronous motors E216143 PRGY2 PRGY8 cURus
Encoder and power
cables
All types E172204 AVLV2 AVLV28 cURus
One Cable Solution All types On request On request On request cURus
Tab. 2: File number-certified products
2.5 Timeliness
Check whether this document is the latest version of the documentation. We make the latest document versions for our
products available for download on our website:
http://www.stoeber.de/en/downloads/.
2.6 Original language
The original language of this documentation is German; all other language versions are derived from the original language.
2.7 Limitation of liability
This documentation was created taking into account the applicable standards and regulations as well as the current state of
technology.
STOBER shall assume no responsibility for damage resulting from failure to comply with the documentation or from use
that deviates from the intended use of the product. This is especially true for damage caused by individual technical
modifications to the product or projecting and operation of the product by unqualified personnel.
To Next Page
Loading...
Need help?
General
