B58FZS 0000000078 EN 002 106
DECOMMISSIONING
(6) Using the lowering function, release the front
loader pins from the catch hooks.
(7) Switch off the tractor.
Apply the parking brake.
Stop the engine.
Depressurize the hydraulic system. To do
so, move all of the operating levers to the
end position.
(8) Uncouple the front loader hydraulic system.
(9) Disconnect the electrical system.
(10) Drive the tractor in reverse out of the front
loader.
(11) Replace the protective caps on the hydraulic
couplings and plugs.
(12) If applicable, put the protective tarp over the
front loader.
The front loader is dismounted.
9.2 Recommissioning
Recommissioning the front loader:
(1) Remove the tarp from the front loader.
(2) Clean the front loader if necessary.
(3) Have maintenance performed on the front loader if necessary (see 8.2.1 Service schedule).
(4) Perform a "Check before each start-up" (see 5.2 Check before each start-up).
(5) Check all of the front loader functions.
The front loader is ready for operation.
Fig. 100 Uncouple the hydraulic system
Fig. 101 Driving the tractor in reverse
To Next Page
Loading...
