Stoll FS - Levelling, Road Driving, and Parking

B58FZS 0000000078 EN 002 88
OPERATION
6.5.4 Putting down the implement
Putting down the implement:
(1) Lower the front loader and the implement
horizontally on the ground or a secure rack.
(2) Switch off the tractor.
 Apply the parking brake.
 Stop the engine.
 Depressurize the hydraulic system.
or
With the implement function actuated,
move the operating lever in the lateral
end positions in order to depressurize the
implement hydraulic system
(see 6.1 Operating elements).
(3) Open the implement locking mechanism
(see 6.4 Operating the implement locking
mechanism).
(4) If applicable, disconnect the hydraulic lines
from the couplings on the change frame
(see 3.7 Hydraulic couplings).
(5) Switch on the tractor.
(6) Unhook the change frame from the
implement hooks.
 Use the dumping function until the upper
cross bar is positioned under the
implement hook.
(7) Slowly drive the tractor away in reverse.
(8) If applicable, cover the implement with a
protective tarp.
 The implement is put down.
Fig. 85 Opening the implement locking mechanism
Fig. 86 Releasing the hydraulic lines
B08C
B090
Fig. 87 Unhooking the change frame
B07T
Fig. 88 Driving away
B07U