Stoll FS - Operating the Hydraulic Couplings; Operating the Plug-In Coupling

B58FZS 0000000078 EN 002 76
OPERATION
6.3 Operating the hydraulic couplings
6.3.1 Operating the plug-in coupling
Connecting plugs with couplings:
(1) Remove the caps and wipe the coupling if necessary.
(2) Insert the connector in the couplings.
(3) Stick the caps together to prevent soiling.
 The plug-in couplings are connected.
Disconnecting the plugs from the couplings:
(1) Pull out the plugs from the couplings.
(2) Put on the caps.
 The plug-in couplings are disconnected.