Stoll FS - Page 15

B58FZS 0000000078 EN 002 14
SAFETY
Dangers when picking up and putting down implements
Dangers during loading work
There is a risk of serious injury and lethal danger due to implements falling down or
uncontrolled lowering of the front loader when unsuitable implements are used or if the
used implements are overloaded.
 Check that the implements are suitable before use.
 Check that the implement is locked correctly by repeatedly putting the implement
down on the ground.
 Perform a visual check on the locking device.
 Only perform the hydraulic locking of the implement up to a height of 1.5 m.
 Check the proper functioning of the implements one time without load before
beginning work.
There is a risk of serious injury and mortal danger when loading and transporting loads,
if the front loader is operated from one side, the load is raised too far over the driver's
seat or if unsuitable implements are used.
 If not equipped, check for retrofitting a cab and/or a FOPS (falling objects protection
structure) / ROPS (roll-over protection structure) within the framework of work
safety regulations.
 If there is no cab or safety equipment, never lift loads over the driver's seat.
 Only use suitable implements, which prevent e.g. rolling back and falling on the
driver's seat.