B58FZS 0000000078 EN 002 20
SAFETY
Position Description
1a Re-tighten all the fixing screws on the mounting kit after the first 5 hours of operation.
1b Keep a safe distance away from electrical lines.
1c Do not stack several loads on top of each other.
1d Only use suitable implement to prevent the load from falling down.
1e Increased risk of tilting when the front loader is raised.
1f Do not stand under the raised front loader.
1g Do not lift or transport persons with the front loader.
2a Observe the operating instructions.
2b Only use suitable implement to prevent the load from falling down.
2c Do not stack several loads on top of each other. Check the inclination of the implement.
2d Do not lift or transport persons with the front loader.
2e Do not stand in the working area of the front loader.
2f Keep a safe distance away from electrical lines.
2g Keep a distance of at least 4 m from electrical high-voltage lines.
2h Do not stand under the raised front loader.
2i Increased risk of tilting when the front loader is raised.
2j Be careful of hydraulic oil under high pressure.
3a Observe the operating instructions.
3b Do not stand in the working area of the front loader. Possible danger due to loads falling down.
4a Only park the front loader with attached implement with a minimum weight of 70 kg.
4b Procedure for unfolding the parking supports.
5a Only park the front loader with attached implement with a minimum weight of 70 kg.
5b Procedure for unfolding the parking supports.
To Next Page
Loading...
