STONEX R25LR - Page 41

Stonex R25/R25LR Total Station - User Manual 39
If F2 [FACEII] has been selected, it is required to turn instrument face.
Repeat the measure in face II, pressing F1[ALL].
Results from the measurements are shown: choose which one you want
to conserve between old, new or average.
Hidden Point
The program allows measuring a point that is not directly visible, using a special hidden point rod.
1. E, N, H of hidden point
2. Rod length
3. Distance R1-R2
Start defining the rod and the EDM settings, using the F4[ROD/ED] key: