8
1.5 Precautions for Safety
◆ Don’t collimate the sun directly
Don’t collimate the sun directly for protecting instrument.
◆ Avoiding the vibrations on the instrument
When transporting, keep the instrument in the case and try your best to lighten vibrations.
◆ Carrying the instrument
When carrying, the instrument handle must be hold tight.
◆ Check the battery power
Before using the instrument, you should check the battery power whether it is enough.
◆ Battery Maintenance
If the instrument is not in using for a long time, the battery should be taken out from the
instrument and stored in separate place. Meantime, the battery should be charged every month.
◆ Taking out the battery
It is not suggested to take out the battery when the instrument is on. Otherwise, stored data
may be lost. So it is better to replace the battery after powering off the instrument.
◆ Setting up the instrument on the tripod
When using it, please ensure the connection between tripod and instrument is firm.
◆ Assembling the tribrach on the instrument
The setting of tribrach would influence the accuracy. The tribrach should be check frequently,
the screw which connects the tribrach must be locked tightly and the central fixing screw should
be tight.
◆ High temperature condition
Don’t put the instrument in high temperature condition for a long time, it is bad for the
instrument performance and it can damage the hardware components.
◆ Temperature changing sharply
The sharp temperature changing on the instrument will shorten the distance measurement
range.
For example, after taking the instrument out from a warm car to a cold condition, wait for some
time: it can be used when it adapts the surrounding condition.
◆ The noise from the instrument
When the instrument is working it is normal if you hear noises from instrument motors.
They will not affect the instrument work.
◆ Stored data responsibility
STONEX® should not be held liable for the lost data because of wrong operation.
To Next Page
Loading...