9
1.6 Transport and shipping
◆ Transport in the field
When transporting the equipment in the field, always make sure that you
either carry the product in its original transport container,
or carry the tripod with its legs splayed across your shoulder, keeping the attached
product upright.
◆ Transport in a road vehicle
Never carry the product loose in a road vehicle, as it can be affected by shock and vibration.
Always carry the product in its transport container and secure it.
◆ Shipping
When transporting the product by rail, air or sea, always use the complete original STONEX®
packaging, transport container and cardboard box or its equivalent to protect the instrument
against shock and vibration.
◆ Shipping and transport of batteries
When transporting or shipping batteries, the person in charge of the product must ensure that
the applicable national and international rules and regulations are observed.
Before transportation or shipping, contact your local passenger or freight transport company.
◆ Field adjustment
After transport, inspect the field adjustment parameters given in this user manual before using
the product.
1.7 Storage
◆ Product
Respect the temperature limits when storing the equipment, particularly in summer if the
equipment is inside a vehicle. Refer to technical datasheet for information about temperature
limits.
◆ Field adjustment
After long periods of storage, inspect the field adjustment parameters given in this user manual
before using the product.
◆ LiPoly batteries
Remove batteries from the product and the charger before storing.
After storage recharge batteries before using.
Protect batteries from damp and wetness.
Wet or damp batteries must be dried before storage or use.
A storage temperature range of -20°C to +30°C/-4°F to 86°F in a dry environment is
recommended to minimize self-discharging of the batteries.
To Next Page
Loading...