STONEX X300 - 4.3 Import Data in Stonex Reconstructor; 4.3.1 General Import and Export Formats (v.3.2)

66
4.3 Import data in Stonex Reconstructor
Stonex Reconstructor software can import raw scan data in Stonex cloud file (x3s) and other
formats. See par. 4.1 for X300 file format description.
x3s files can be directly imported into Stonex Reconstructor, while x3r, x3i and x3a files must be
converted before importing.
4.3.1 General import and export formats (v.3.2)
Data type
Import Formats
Export Formats
Export Rec.
proprietary
formats
Unstructured
Point Cloud
 Kubit point cloud (.ptc)
 LAS format (.las)
 PLY point cloud (.ply)
 Text format (.txt)
 e57 unstructured point cloud
 PTS point cloud (.pts)
 Kubit point cloud (.ptc)
 LAS format (.las)
 PLY point cloud (.ply)
 Text format (.txt)
 e57 unstructured point cloud
 PTS point cloud (.pts)
 (.rup)
Structured
Point Cloud
 Comma separated values (.csv)
 DEM ascii header+matrix (.asc)
 Radscan text file (.txt)
 Text format (.txt)
 Stonex Reconstructor format (.x3s)

 e57 structured and unstructured
point cloud
 Generic binary raster (*.*)
 Text format (.txt)
 Kubit point cloud (.ptc)
 LAS format (.las)
 Leica Scanstation scan (.ptx)
 PLY point cloud (.ply)
 PTS point cloud (.pts)

 (.rup)
 (.rgp)
 (.rrf)
Triangle
Meshes
 DXF (.dxf)
 IFC (.ifc)
 STL mesh (.stl)
 WRML (.wrl / .wrml)
 3DS (.3ds)
 DXF (.dxf)
 PLY mesh (.ply)
 WRML (.wrl)
 STL mesh (.stl)
 Text format (.txt)
 (.rtm)
 (.vg3)
Polylines
 DXF polyline (.dxf)
 List of points (.txt)
 DXF polyline (.dxf)
 (.rpl)
Trajectories
 DXF trajectory (.dxf)
 Trajectory from point list (.txt)
 (.rtr)
Movies
 AVI (video codec installed on the
pc)
Complete
projects

 (.recprj)
 (.r2s)
 (.siprj)
Table 9: Import/export formats