62
3.6 X300 L - Pay per Use
From a practical standpoint, “Pay per Use” means that some features of the X300 Laser Scanner
have been locked or limited by factory defaults.
This is the case of the X300 L, a laser scanner similar to the regular X300 but with a shorter range
and subject to working time limitation
5
.
To check which functionalities are enabled and which are locked/limited, enter
Information/Features menu (see par. 3.5.9.4).
If the Scan feature is Disabled, that means that the
“Pay per Use” period is expired.
As consequence, the X300 unit cannot be used for
scanning any longer, even though the stored data
are still accessible and can be managed normally
through Wi-Fi, Smart cable and USB memory drive.
To verify the expiry time of your instrument, enter
Information/Features menu (see par. 3.5.9.4) and
refer to Scan information.
5
Contact the nearest authorized Stonex sales representative for information about the “Pay per Use” program.
Click
here for technical information about X300 L Laser Scanner or visit Stonex website: www.stonexpositioning.com
To Next Page
Loading...