Return To Table of Contents
136 2030-809-002 REV D www.stryker.com
EPIC II
®
PLUS, Optional Litter Assembly
Epic II
®
PLUS, Optional Litter Assembly - 2030-031-210 (Continued) (Reference Only)
Item Part No. Part Name Qty.
V 0059-191-000 On/Off Switch 1
X 1550-090-001 Hospital Plug Label 1
Y 2011-001-104 Danger Label 1
AA 2030-231-007 EPIC II
®
PLUS Logo Label 2
AB 2030-031-009 Instruction Label 1
AC 2030-031-010 EPIC II
®
PLUS Head End Label 1
AD 2030-031-208 Top Display Housing 1
AE 2030-031-910 Display/CPU Board 1
AF 2040-031-040 Power Inlet Shield 1
AG 2040-032-053 Bottom Head End Enclosure 1
AH 2040-031-054 Bumper Attachment Weldment 1
AK 2040-031-063 Top Head End Enclosure 1
AL 2040-031-077 Cover Plate 1
AM 2040-031-092 Head End Electronics Cover 1
AN 2040-031-103 Power Label 1
AP 2040-031-807 Bed AC Power Jumper Cable 1
AR 2040-031-809 CPU/Crossover PCB Jumper Cable 1
AS 2040-031-810 On/Off Cable 1
AT 2040-031-900 AC Switchover PCB 1
AU 2040-231-075 Head End Reinforcement Bracket 2
AV 2040-031-110 Pivot Bracket, Right 1
AW 2040-031-111 Pivot Bracket, Left 1
AX 2040-231-069 Display Bumper 1
AY 3000-300-114 4” Wire Tie 3
AZ 3000-300-115 Standoff 4
BA 3001-300-099 Pivot Bearing 2
BB 3001-300-870 8” Ground Strap 2
BC 3001-400-953 Switch Cap 6
BD 7000-001-326 Foam Tape (26.75”) 1
BE 8800-380-000 Foam Tape (26.25”) 1
BF 8800-380-000 Foam Tape (1.25”) 2
BH 2040-031-805 Umbilical Cord Support Plate 1
BJ 0007-065-000 Truss Hd. Torx 2
BM 0050-032-000 Pan Head Machine Screw 2
BN 0016-023-000 Nylock Hex Nut 2
To Next Page
Loading...
Need help?
General
