Return To Table of Contents
www.stryker.com 2030-809-002 REV D 223
Guidance and Manufacturer’s declaration - Electromagnetic Emissions
The Epic II® Critical Care Bed is intended for use in an electromagnetic environment specified below. The
customer or the user of the Epic II® Critical Care Bed should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment
RF Emissions
CISPR 11
Group 1
The Epic II® Critical Care Bed uses RF energy only for
its internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
CISPR 11
Class A
The Epic II® Critical Care Bed is suitable for use in all
establishments other than domestic and those directly
connected to the public low voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Class A
Voltage Fluctuations
Flicker Emissions
IEC 61000-3-3
Complies
EPIC II® CRITICAL CARE BED (CONTINUED)
EMC Information
To Next Page
Loading...
Need help?
General
