Product Description / Intended Use
17 EN
5. Ground Lift Switch: Disconnects the ground pin of the balanced
output jack (6) from ground. Slide the switch to the right to
eliminate humming caused by a ground loop; otherwise, slide the
switch to the left for regular use.
6. Balanced Audio Output Jack: Connects to an XLRM-type
connector to connect the receiver to a mixer or integrated
amplifier.
7. Unbalanced Audio Output Jack: Connects to an unbalanced
mixer.
8. Power Input Jack: Connects to the DC plug from the Sidne™
console.
To Next Page
Loading...
