a
FRONT CATALYTIC CONVERTER
I
EMISSION CONTROL
(AUX.
EMISSION CONTROL
DEVICES)
2.
Front Catalytic Converter
A:
REMOVAL
1)
Remove the center exhaust pipe. <Ref. to
EX(D0HC
TURBO)-8, REMOVAL, Center Exhaust
Pipe.>
2)
Separate the front catalytic converter (A) from
rear catalytic converter (B).
EN099:
B:
INSTALLATION
NOTE:
Replace the gaskets with new ones.
Install in the reverse order
of removal.
C:
INSPECTION
1)
Make sure there are no exhaust leaks from con-
nections and welds.
2)
Make sure there are no holes or rusting.
EC(D0HC TURBO)-3
To Next Page
Loading...
