I
REAR CATALYTIC CONVERTER
EMISSION CONTROL
(AUX.
EMISSION CONTROL DEVICES)
3.
Rear Catalytic Converter
A:
REMOVAL
1)
Remove the center exhaust pipe. <Ref.
to
EX(D0HC
TURBO)-8, REMOVAL, Center Exhaust
Pipe.>
2)
Separate the rear catalytic converter (B) from
front catalytic converter (A).
I
EN0993
B: INSTALLATION
NOTE:
Replace the gaskets with new ones.
Install in the reverse order of removal.
C: INSPECTION
1)
Make sure there are no exhaust leaks from con-
nections and welds.
2)
Make sure there are no holes or rusting.
EC(D0HC TURBO)-4