Sun Microsystems Sun Fire X4100 - F.3.5 SAS Topology Screens

F-10 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Service Manual • August 2009
F.3.5 SAS Topology Screens
The SAS Topology screen (shown below) presents a view of the adapter’s SAS
hierarchy. You can scroll right to view additional information about the devices (see
“SAS Topology Screens” on page 10 through page 13.) Descriptions of the fields are
given in
TABLE F-5.
The SAS Topology screen shows the following objects and their significant properties:
■ Adapter
■ PHYs
■ Attached Devices
■ Expanders/Enclosures
SAS Topology Screen
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* SAS Topology -- SAS1064 *
* Device Identifier Discovery Device *
* SAS1064(02:03:00) Status Info *
* * PHY 0 Good *
* * PHY 1 Good *
* * PHY 2 SEAGATE ST936701LSUN36G 0456 Good SAS *
* * PHY 3 SEAGATE ST973401LSUN72G 0356 Good SAS *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* Esc=Exit F1=Help Alt+M=More Keys *
* Alt+D=Device Properties Alt+E=Expander Properties *
*******************************************************************************
To expand the SAS topology display, select an expander or enclosure and press Enter
to display all its PHYs/devices/bays. To collapse the display, press Enter again.
While the cursor is on the Device Identifier, you can perform the following actions: