Sun Microsystems Sun Fire X4100 - Device Paths

G-1
APPENDIX
G
Device Paths
G.1 Sun Fire X4100/X4100 M2 Device Paths
Use the /etc/path_to_inst command to determine the device paths of your
system.
The device paths for the Sun Fire X4100 and X4100 M2 servers is as follows:
Network 0 (nge0) /pci@0,0/pci10de,cb84@a
Network 1 (nge1) /pci@7b,0/pci10de,cb84@a
Network 2 (e1000g0) /pci@7b,0/pci1022,7458@11/pci8086,1011@1
Network 3 (e1000g1) /pci@7b,0/pci1022,7458@11/pci8086,1011@1,1
Disk 0 /pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@2,0
Disk 1 /pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@3,0
DVD/CDROM /pci@0,0/pci-ide@6/ide@0/sd@0,0
TTYA /isa/asy@1,3f8
VGA Port /pci@0,0/pci10de,5c@9/display@3
USB (Front) /pci@0,0/pci108e,cb84@2,1/<device>@6
USB (Rear, High) /pci@0,0/pci108e,cb84@2,1/<device>@2
USB (Rear, Low) /pci@0,0/pci108e,cb84@2,1/<device>@1
PCI-E Slot 0 /pci@0,0/pci10de,5d@d/<device>
PCI-E Slot 1 /pci@0,0/pci10de,5d@e/<device>