Sun Microsystems Sun Fire X4100 - Page 276

Index-4 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Service Manual • August 2009
R
RAID
activating an array, F-37
creating RAID 0 volume, F-33
creating RAID 1 volume, F-35
creating second RAID volume, F-36
deleting an array, F-38
locating a disk drive, F-38
managing hot spares, F-36
synchronizing arrays, F-37
viewing RAID volume properties, F-37
rear fan tray
fault LED, C-15
rear fan tray replacement
Sun Fire X4200/X4200M2 only, 3-89
redirecting console output, B-2
related documentation, -xii
replaceable components list, 1-14
Reset switch SW3, 2-61
resetting passwords, 2-54
S
safety guidelines, -xi
sample BIOS setup screens, 2-12
SAS BIOS
activating a RAID array, F-37
configuration tasks, F-31
Configuration Utility screens, F-3
creating RAID 0 volume, F-33
creating RAID 1 volume, F-35
creating second RAID volume, F-36
deleting a RAID array, F-38
exiting Configuration Utility, F-30
initialize with BIOS Boot Specification, F-2
locating a RAID disk, F-38
managing RAID hot spares, F-36
overview, F-1
starting Configuration Utility, F-2
synchronizing RAID arrays, F-37
viewing RAID volume properties, F-37
SCSI connector pinouts, E-5
Serial Attached SCSI BIOS, See SAS BIOS
serial attached SCSI connector pinouts, E-5
serial connector pinouts, E-2
server features list, 1-1
Service Action Required LED, C-13
shutting down the server, 2-3
SP password reset, 2-54
special considerations, BIOS, 2-5
specs, system, A-1
summary of features, 1-1
Sun Fiire X4100 M2
component overview figure, 1-8
Sun Fire X4100
acoustic noise emission specs, A-3
DIMM configurations, 3-65
DIMM population rules, 3-65
environmental specs, A-2
front bezel removal, 3-7
front cover removal, 3-8
main cover removal, 3-6
PCI-X slot speeds, 3-73
physical specs, A-1
Power button, 2-2
power specs, A-1, A-2, A-4
Sun Fire X4100/X4100 M2 component overview
figure, 1-6
Sun Fire X4200
acoustic noise emission specs, A-4
back panel figure, 1-9
battery replacement, 3-15
component overview figure, 1-10
environmental specs, A-4
front bezel removal, 3-11
front cover removal, 3-12
front panel figure, 1-8
main cover removal, 3-10
overview figure, 1-10
PCI-X slot speeds, 3-74
physical specs, A-3
Power button, 2-3
power specs, A-3
SW2 NMI dump switch, 2-61
SW3 Reset switch, 2-61
System Overheat Fault LED, C-14
system specs, A-1
T
tools required, 3-2
TP51/TP52 jumper, 2-60
U
USB 1.1 connector pinouts, E-1