2-18 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Service Manual • August 2009
Sun Fire X4100 M2/X4200 M2 Servers
Advanced
********************************************************************************
* IDE Configuration * DISABLED: disables the *
* *************************************************** * integrated IDE *
* OnBoard PCI IDE Controller [Primary] * Controller. *
* * PRIMARY: enables only *
* * Primary IDE Master : [ATAPI CDROM] * the Primary IDE *
* * Primary IDE Slave : [Not Detected] * Controller. *
* * SECONDARY: enables *
* Hard Disk Write Protect [Disabled] * only the Secondary IDE *
* IDE Detect Time Out (Sec) [5] * Controller. *
* * BOTH: enables both IDE *
* ATA(PI) 80 Pin Cable Detection [Disabled] * Controllers. *
* SATA0 IDE Interface [Disabled] * *
* SATA1 IDE Interface [Disabled] * ** Select Screen *
* IO4 SATA0 IDE Interface [Disabled] * ** Select Item *
* IO4 SATA1 IDE Interface [Disabled] * +- Change Option *
* First Boot Device from [P-ATA] * F1 General Help *
* * F10 Save and Exit *
* * ESC Exit *
* * *
********************************************************************************
To Next Page
Loading...
