8-12 MID UNIT
Mount
Check upper and lower mount.
If excessive wear, corrosion, or other damage is found, replace
mount.
INSPECTION
NOTE:
If any component is found to be excessively worn, cracked,
defective or damaged in any way, it must be replaced.
O-ring
Check O-ring for oil strainer and oil pump.
If excessively wear or other damage is found, replace O-ring.
Oil seal
Check driveshaft upper oil seal for leakage or damage.
If cracks, cuts or other damage is found, replace seal.
NOTE:
Install oil seal with lip (spring side) facing downward.
Mid unit component
Check oil pan, driveshaft housing, engine holder and mount
covers.
If cracks, defects or other damage is found, replace it.
To Next Page
Loading...
