8-22 MID UNIT
INSPECTION
NOTE:
If any component is found to be excessively worn, cracked,
defective or damaged in any way, it must be replaced.
BUSHINGS
Check all bushings.
If excessive wear or other damage is found, replace bushing.
If bushing fit is loose when installing, replace bushing.
OIL SEAL
Check swivel bracket seal.
If excessive wear or other damage is found, replace seal.
CLAMP BRACKET SHAFT
Check clamp bracket shaft.
If clamp bracket shaft is bend or twisted, replace shaft.
BRACKET
Check clamp brackets, steering bracket and swivel bracket.
If cracks or other damage is found, replace bracket (s).
To Next Page
Loading...
