PERIODIC MAINTENANCE 2-3
MAINTENANCE AND TUNE-UP PROCEDURES
(1) Place the outboard motor upright on a level surface.
(2) Remove the motor cover.
(3) Remove the oil level dipstick and wipe it clean.
(4) Insert it fully into the dipstick hole, then remove it to check
oil level.
This section describes the servicing procedures for each of
the periodic maintenance requirements.
ENGINE OIL / ENGINE OIL FILTER
ENGINE OIL LEVEL CHECK
Inspect oil level before every use.
(5) Oil level should be between the full level line (Max.) and
low level line (Min.)
If the level is low, add recommended oil to full level line.
Recommended oil :
• 4 stroke motor oil
• API classification SE, SF, SG, SH, SJ.
• Viscosity rating SAE 10 W-40.
Full level
line
Low level
line
1 Oil level dipstick
2 Oil filler cap