POWER UNIT 6-13
FINAL ASSEMBLY CHECK
Perform the following checks in order to ensure proper and safe
operation of the repaired unit.
• All parts removed have been returned to the original positions.
• Lower unit gear engagement is properly adjusted.
• Fuel hose routing matches the service manual illustration. (See
the page 10-8 to
10-10.)
• Wire routing matches the service manual illustration. (See the
page 10-2 to
10-7.)
• No fuel leakage is evident.
• No water leakage is evident during final test running.
INTAKE MANIFOLD / FUEL INJECTOR / DELIVERY PIPE
1. Install the intake manifold assy. (See the page 6-5.)
2. Install the fuel injector and the delivery pipe. (See the page
5-12.)
To Next Page
Loading...
