Suzuki DL650K5 - Page 157

ENGINE 3-103
• The other arrow mark “2” on the intake camshaft sprocket
should now be pointing straight up. Starting from the roller pin
that is directly above the arrow mark “2” count out 16 roller
pins (from the intake camshaft side going towards the exhaust
camshaft side). Engage the 16th roller pin

D on the cam
chain with the arrow mark “3” on the exhaust sprocket.
(!3-103)
NOTE:
The cam chain should now be on all three sprockets. Be careful
not to move the crankshaft until the camshaft journal holders
and cam chain tension adjuster is secured.
No.2 (REAR) CYLINDER HEAD
• Install the dowel pins

1.
“3”“3”
12
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
2345678910111213141516
PartShark.com
877-999-5686