SERVICING INFORMATION 9-17
*1
*3
*4
*5
*6
*2
1
Wiring harness No.2
*3
Triangle mark of each spark plug cap must be
brought to the exhaust side.
2 Magneto lead wire *4 Cut the clamp end.
3 Ignition coil No.2 *5 Do not slack the lead wire.
*1 Clamp the turn signal light read wire.
*6
Pass through the PAIR reed valve lead wire
between the frame and PAIR control solenoid
valve.
*2
Pass through the license light read wire over the
seat lock cable.
PartShark.com
877-999-5686
To Next Page
Loading...
