BASIC TROUBLESHOOTING DIAGRAM
1. Gather information from the customer. (
:
Page 82)
2. Perform the pre-diagnosis inspection. (
:
Page 83)
3. Inspect the ABS indicator light. (
:
Page 86)
6. Inspect the ABS components. (
:
Page 119)
4. Output the DTCs stored in the ABS control unit. (
:
Page 89)
7. Delete the DTCs and check the brake operation. (
:
Page 91)
5. Perform appropriate troubleshooting procedures according to the DTCs output.
(
:
Page 90)
If troubleshooting procedures cannot be performed, try to determine the cause of the mal-
function according to the information gathered in 1 through 4 and inspect the wiring.
(
:
Page 77 and 78)
DL650K7/AK7 (’07-MODEL) 13-81
PartShark.com
877-999-5686